| Setting instruction |
| There are 2 different version in which the stones can be set into the glue. |
| Version1 Should not be used as Glue can be seen between the stones. |
 |
| Picture 1 Incorrect |
| Version 2 is
advisable and provides a nice homogeny surface. The stone are set (handled) by using a vacuum pump tweezers. The stone should only in the glue up to girdle (belt, neck). Is deeper the color of stone appear darker.  Picture 2 Correct Setting Instruction By setting the stones in the 1 row a small gap should be let between each stones. The second row stone should be set displaced(between stone 1 and 2 on the row above). The 3rd row is set again the same as the first one and the 4th row the same as the second one. After the stones are set the stones are pressed into the glue with the metal or wood object the gap of the stones disapear as the stone much closer to each other. The stones should not overlap or sit on each other. If this the case remove the stone with the toothpick fill some glue into the hole and replace with a new stone... if necessarily the next smaller size. The same has to be done if a stone appear darker stone sit to deep. After the setting is finish glue rest on the metal or sport have to be removed with an Alcohol tipped cotton bud. |
